My neighbors 01 Dodge Dakota pickup truck was having an HVAC blower motor issue. It worked on high only and sometimes not at all.
When I typed a description of the problem in my favorite search engine, the number one result said. Do you have a 2001-2004 Dodge Dakota, or 2001-2006 Dodge Durango AC blower motor fan speed locked in one position? I said to myself, yes I do. And after doing a little research I discovered that a lot of other people are going through the same thing.
Here we’ll discuss the common issue of Dodge blower motor problems and the recommended steps to help prevent melted connectors, damaged wire harnesses and repeat failures of the blower resistor. Note that Chrysler evaporator core problems continue to grow and that AC part is close to the fan motor.
Dodge Vehicles with Melted Blower Resistors
Although it was the Dakota that tipped me off to this problem, I can see the Dodge Durango from 2001 through 2006 uses the same part number and wiring harness repair kit.
These are not the only Dodge or Chrysler vehicles that are experiencing problems with this component. I’ve seen the 2001 through 2004 Chrysler Sebring and Stratus owners from 2001 through 2006 without climate control systems complaining about the same problems.
To round things out I had a Dodge Ram pickup and cargo van about a year ago that had the same malfunction. It would seem an extremely large number of vehicles became involved with this blower resistor failure issue.
The Problem with the Blower Resistor
I have written about blower motor problems before and I even made a video about Chevrolet blower problems a couple of years ago that has helped a lot of people. The Dodge circuit is very different than the GM set up. I’m surprised, after digging out a wiring diagram, that there’s only one fuse and no relay in this circuit.
However, it wasn’t the configuration of the circuit that’s causing the blower motor resistor to overheat. The overheating gets so intense that in many instances you’ll find the connector damaged.
When people just replace the resistor they might find the automobile still has intermittent blower operation. The terminals become so toasted they no longer provide a physical connection to the resistor bridge.
In this situation the connector and pigtail harness will need replacing along with the resistor. I think the question is why the resistor got so hot.
I cannot provide a definitive answer of what’s exactly wrong with everybody’s car. However, I can tell you what I found on my neighbors 2001 Dodge Dakota. Then you can see if yours is the same way.
The type of carnage I found with the connector and resistor signaled me to pull out the blower motor and take a look at it.
What I found was the motor, although still operating when voltage was applied, was more difficult then it should be to turn by hand. It felt a little stiff too me.
And when I gave it a good push it had no free wheel it just stopped instantly. When we sourced a new blower motor it was much easier to move by hand and when I gave it a good flick it didn’t spin by itself long but it did not immediately stop like the old one.
Take the Extra Steps
I can’t guarantee that the blower motor is responsible for taking out everybody’s resistor bridge, but I can say it might make sense to go ahead and replace the motor along with the resistor and connector.
As far as my neighbors 01 Dodge Dakota pickup truck I haven’t seen him since the repairs. No news is good news and I believe his truck is fixed for the long-term.
After stopping by a few message boards and reading some notes before writing this article, I see many people are not replacing the blower resistor connector. They’re opting to make repairs to what’s left of the original connector.
I think it’s worth taking the extra step, because the heat became so intense it made the connector brittle and reduced the integrity of the electrical connection. Of course, I’m talking about terminal on the resistor and the connector on the harness side.
What I don’t like about the available repair kits is they don’t come with instructions. They also don’t come with terminal repair tool. You need one to help remove the metal connector from the plastic holder. Another issue, all the wires in the kit are the same color. For this reason it’s recommended to perform splice repairs one at a time. This way they end up in the same place as the factory connector.
Dodge Blower Motor Repair Tips
I noticed that some people are struggling with small issues that I learned to deal with over the years and now take for granted. For one, the standard factory connector found on all Chrysler and Dodge products from the early 2000’s is of the snap lock variety.
It requires two actions to release it from the blower motor resistor. On the Dodge Dakota I worked on, I found a red lock tab that required removal.
Then you depress a black locking tang and hold it in while you wiggle the connector free. However, lets still call it a bit of a struggle, because the plastic from the connector had melted and fused to the plastic of the resistor bridge.
In addition, when you attempt to pull the wires in an out of the plastic connector you’ll find them retained with a locking mechanism. You release them with a jeweler’s screwdriver or a terminal repair tool.
The metal electrical connector also has a top and bottom side. When it slides into the connector you must get the orientation correct for it to smoothly lock into place.
Personally I think this is a great do-it-yourself repair that only requires some basic skills to accomplish. A Dealership would probably charge a couple hundred dollars parts and labor just to replace the connector and resistor.
Ordering the Chrysler AC Blower Repair kit
If you order the connector kit shown on the right amazon will offer you a package deal where it say’s Frequently Bought Together items.
This includes the Dorman 973-026 Blower Motor Resistor for Chrysler or Dodge automobiles and TYC 700071 Replacement Front Blower Assembly for around eighty dollars.
This is a selected page from the air-conditioning section of the you fix cars website. This repair module currently contains about fifteen articles that walk you through the theory of operation, common problems, diagnostic tips and resources help you better understand how the automotive air-conditioning system works.
The thereadinggroup.us homepage provides visitors with a solid understanding of what’s available on this website and tips for getting the most out of your visit.